Looking for:
- Enable DirectAccess | Microsoft Learn |
Prerequisites for Deploying DirectAccess | Microsoft Docs.Enable DirectAccess | Microsoft Docs
Before beginning the deployment steps, ensure that you have completed the planning steps described in Plan a Basic DirectAccess Deployment. This topic includes sample Windows PowerShell cmdlets that you can use to automate some of the procedures described. For more information, see Using Cmdlets. To deploy Remote Access, you must install the Remote Access role on a server in your organization that will act as the Remote Access server. On the Select server roles dialog, select Remote Access , and then click Next.
Click Add Features , click Next , and then click Install. On the Installation progress dialog, verify that the installation was successful, and then click Close. Windows PowerShell equivalent commands. In the Remote Access Management console, select the role service to configure in the left navigation pane, and then click Run the Getting Started Wizard.
Select the topology of your network configuration and type the public name to which remote access clients will connect. Click Next. Prerequisites for Deploying DirectAccess. In this scenario, a single computer running either Windows Server , Windows Server R2 or Windows Server , is configured as a DirectAccess server with advanced settings. In the simple scenario, DirectAccess is configured with default settings by using a wizard, without any need to configure infrastructure settings such as a certification authority CA or Active Directory security groups.
To set up a single DirectAccess server with advanced settings, you must complete several planning and deployment steps. You want all wireless computers in the domain where you install the DirectAccess server to be DirectAccess-enabled.
When you deploy DirectAccess, it is automatically enabled on all mobile computers in the current domain. Planning for the DirectAccess infrastructure. This phase describes the planning required to set up the network infrastructure before beginning the DirectAccess deployment. Planning for the DirectAccess deployment. This phase describes the planning steps required to prepare for the DirectAccess deployment.
It includes planning for DirectAccess client computers, server and client authentication requirements, VPN settings, infrastructure servers, and management and application servers.
Configuring the DirectAccess infrastructure. This phase includes configuring network and routing, configuring firewall settings if required, configuring certificates, DNS servers, Active Directory and GPO settings, and the DirectAccess network location server.
Configuring DirectAccess server settings. This phase includes steps for configuring DirectAccess client computers, the DirectAccess server, infrastructure servers, management and application servers. Verifying the deployment. This phase includes steps to verify the DirectAccess deployment. Ease of access. Managed client computers running Windows 10, Windows 8. These clients can access internal network resources via DirectAccess any time they are located on the Internet without needing to log in to a VPN connection.
Client computers not running one of these operating systems can connect to the internal network via VPN. Ease of management. What they provide to end users is a pseudo public IP address. When the client is behind a NAT device, it will try to use Teredo. Many businesses such as hotels, airports, and coffee shops do not allow Teredo traffic to traverse their firewall. SSL outbound traffic will most likely be allowed on all networks.
A DirectAccess client will make use of this when other methods such as Teredo or 6to4 fail. More information about transition technologies can be found at IPv6 transition technologies.
Skip to main content. This browser is no longer supported. Download Microsoft Edge More info. Table of contents Exit focus mode.
No comments:
Post a Comment